雙組份打膠機常用到哪些檢修方式？
任何機器使用一段時間以后都會有磨損，包括人還要每年體檢呢。在機器的使用過程中我們使用的精心一些，定期來檢修一下，可以加長機器的使用壽命！那么
雙組份打膠機常用到哪些檢修方式？
Any machine will wear and tear after being used for a period of time, including annual physical examination. In the process of using the machine, we should use it carefully and check it regularly to prolong the service life of the machine! What maintenance methods are commonly used for two-component sealant dispenser?
強制維修法
Mandatory maintenance law
這種的方法是針對于機器設備的維修日期、類別和內容預先制定具體計劃，并嚴格按計劃進行，而不管機器設備實際技術狀況如何。優點是便于在維修前作好充分準備，并且能夠較有效地保證加工設備正常運轉。該的方法適用于須嚴格保證運轉的特別重要、復雜的機器設備。
This method is to make a specific plan in advance for the maintenance date, category and content of machinery and equipment, and strictly follow the plan, regardless of the actual technical status of machinery and equipment. The advantage is that it is convenient to make full preparations before maintenance, and can effectively ensure the normal operation of processing equipment. This method is applicable to particularly important and complex machinery and equipment that must strictly ensure safe operation.
定期維修法
Periodic maintenance method
是據機器設備實際使用情況，參考有關維護保養周期，制定機器設備維修工作的計劃日期和大致的維修工作量。這種的方法有利于做好維修前準備工作。
According to the actual use of machinery and equipment and referring to the relevant maintenance cycle, the planned date and approximate maintenance workload of machinery and equipment maintenance are formulated. This method is conducive to the preparation before maintenance.
檢查后維修法
Maintenance after inspection
這種的方法事先規定機器設備的檢查計劃，根據檢查結果和以前的維修資料，確定維修日期和內容。這種的方法簡便易行，但掌握不好就會影響維修前的準備工作。
This method specifies the inspection plan of machinery and equipment in advance, and determines the maintenance date and content according to the inspection results and previous maintenance data. This method is simple and easy to operate, but the preparation before maintenance will be affected if it is not mastered well.
部分檢測法
Partial detection method
其特性是雙組份打膠機設備各零部件不在同一時間段檢測，而是按設備獨立部分，按順序分別進行檢測．每次只檢測其中部分。這種方法的優點是，由于檢測工作量分散，化整為零，因而可利用節假日或非生產時間進行檢測，可增加設備的生產時間，提高設備的利用率。
Its characteristic is that all parts of two-component sealant dispenser equipment are not tested at the same time, but are tested separately according to the independent parts of the equipment in order. Only part of the equipment is tested each time. The advantage of this method is that because the detection workload is scattered and the whole is broken into parts, it can be detected during holidays or non production time, which can increase the production time of equipment and improve the utilization rate of equipment.
零部件檢測法
Parts inspection method
將需檢測的設備零部件拆下來，換上事先準備好的同樣零部件，也就是用簡單“插入”、“拉出”的方法更換零部件。這種方法的優點是可節省拆裝時間，其缺點是需一定數量的備件，占用資金多。
Dismantle the equipment parts to be tested and replace them with the same parts prepared in advance, that is, replace them with simple "insert" and "pull out" methods. The advantage of this method is that it can save disassembly time, while the disadvantage is that it requires a certain number of spare parts and takes up a lot of money.
同步檢測法
Synchronous detection method
指生產過程中在工藝上相互之間緊密聯系的多臺設備，安排在同一時間段內進行檢測，實現檢測同步化，以減少分散修理所占的停機時間。
It refers to multiple equipment that are closely related to each other in the process of production, and are arranged to be tested in the same time period to achieve synchronization of testing, so as to reduce the downtime of decentralized repair.
How much do you know about the maintenance methods commonly used for the above two-component sealant dispensers? Welcome to our website http://sunflowder5188.com.cn Message consultation!
上一篇：全自動邊框機的4種常見故障
下一篇：
